DIY & Home Improvement

ret5hd

(21,320 posts)

10. i won't speak to that...

Sun Apr 14, 2024, 11:12 AM

Apr 2024

i have decades of machine shop experience…i wouldn’t buy one for one little job, but i know how to “adjust” things and methods to make sure i get an acceptable result (like the drill bit advice).

do what feels right…is this job a “one-and-done”? are you intending to start or add-to a tool collection for future projects? do you want to become a tool addict and spend hundreds or even thousands of dollars on tools that you now have to invent projects for? will your spouse/partner now expect you to remodel the entire house?

welcome to my world.

Edit history

Please sign in to view edit histories.

Recommendations

1 members have recommended this reply (displayed in chronological order):

Drum

11 replies

= new reply since forum marked as read

Highlight:

Need help understanding tap & die sizes [View all] Nittersing Apr 2024 OP

1/4-20 tap must be missing from your set. amerikat Apr 2024 #1

OK - found it... nt Nittersing Apr 2024 #6

yes, a number 7 drill is correct, BUT... ret5hd Apr 2024 #2

Good tip about a smaller drill hole. Thanks. nt Nittersing Apr 2024 #7

Do you think a drill guide is worth it? Or is it mostly hype? Nittersing Apr 2024 #9

i won't speak to that... ret5hd Apr 2024 #10

and that item IS NOT what you need... ret5hd Apr 2024 #11

You are on the right track. 1. look closer at the tap. 2. look for an accompaning chart that details the layout of the.. usaf-vet Apr 2024 #3

This is how I finally found it... matching up the threads Nittersing Apr 2024 #8

Do. NOT. essaynnc Apr 2024 #4

I was surprised to see that there's a choice of tap drill sizes for 50% and 75% thread engagement. usonian Apr 2024 #5